مقاله در مجلات

Effect of misch-metal addition on physical and mechanical properties of Al-Ni-Zr melt spun ribbons
Silica-free Zirconia-Based Primary Slurry for titanium investment casting
Role of Tensile Elastostatic Loading on atomic structure and Mechanical Properties of Zr55Cu30Ni5Al10 bulk metallic glass, Materials Science and Engineering A, 10 April 2019
Effects of Nb minor addition on atomic structure and glass forming ability of Zr55Cu30Ni5Al10 bulk metallic glass, Materials Research Express, June 2019
Effect of misch-metal addition on physical and mechanical properties of Al-Ni-Zr melt-spun ribbons, Transactions of the Indian Institute of Metals, April 2019
Extra rejuvenation of Zr55Cu30Al10Ni5 bulk metallic glass using elastostatic loading and cryothermal treatment interaction, Journal of Non-Crystalline Solids, 2019
بررسي رفتار شكست نمونه هاي كامپوزيتي زمينه آمورف حجمي
Study on crystallization of rapid solidified ribbons of (Al 90 Ni 8 Zr 2 ) 98 Mm 2 alloy
Effect of Al on the Structure and Magnetic Properties of Nanocrystalline FeSiBPCu Melt-Spun Ribbons
High nonlinear optical response of Lanthanum-doped TiO2 nanorod arrays under pulsed laser irradiation at 532 nm
تاثیرعملیات حرارتی بر ساختار و دمای کوری آلیاژ فرومغناطیس نیکل ، مهندسی متالورژی ، دوره 21، شماره 2 - شماره پیاپی 70، تابستان 1397، صفحه 88-94
Crystallization kinetics of Cu47Zr47Al6 and (Cu47Zr47Al6)99Sn1 bulk metallic glasses, Journal of Non-Crystalline Solids 498 (2018) 272–280
Microstructure and mechanical properties of a Cu-Zr based bulk metallic glass containing atomic scale chemical heterogeneities , Materials Science & Engineering A, 729 (2018) 433–438
Study on crystallization of rapid solidified ribbons of (Al90Ni8Zr2)98Mm2 alloy
Effect of Al on the Structure and Magnetic Properties of Nanocrystalline FeSiBPCu Melt-Spun Ribbons, Trans Indian Inst Met (2018) 71(1):35–39
Effect of Joule-heating annealing on giant magnetoimpedance of Co64Fe4Ni2B19-xSi8Cr3Alx (x = 0, 1 and 2) melt-spun ribbons
Effect of Joule-heating annealing on giant magnetoimpedance of Co64Fe4Ni2B19-xSi8Cr3Alx (x = 0, 1 and 2) melt-spun ribbons, Journal of Ultrafine Grained and Nanostructured Materials, 2017
"Microstructure and interfacial shear strength in W/(Zr55Cu30Al10Ni5)100-xNbx composites- Journal of Materials Engineering and Performance November 2017, Volume 26, Issue 11, pp 5571–5576
Effect of rare-earth elements and quenching wheel speed on the structure, mechanical and thermal properties of rapidly solidified AZ91 Mg melt-spun ribbons
Ion beam energy dependence of surface and structural properties of amorphous carbon films deposited by IBSD method on Ni–Cu alloy, Journal of Materials research 14 March 2017, pp. 1367-1375
The of Effect of Nb Content on Mechanical Behavior and Structural Properties of W/(Zr55Cu30Al10Ni5)100xNbxComposite, METALLURGICAL AND MATERIALS TRANSACTIONS A May 2017, Volume 48, Issue 5, pp 2496–2503
Statistical weibull analysis of compressive fracture strength of (Zr55Cu30Al10Ni5)99Nb1 bulk metallic glass, Journal of Alloys and Compounds, Volume 695, 25 February 2017, Pages 2740-2744
Roughness kinetic and multiaffinity of anisotropic etched silicon
بررسی اثر دمای زیرلایه بر خواص ساختاری و فیزیکی لایه نازک کربن انباشت شده به روش کندوپاش پرتو یونی
Stable multilayer TiO2–SiO2 coatings for antireflection applications
Correlation study of structural, optical and electrical properties of amorphous carbon thin films prepared by ion beam sputtering, Applied Surface Science 360 (2016) 52–58
A proposed mechanism for investigating the effect of porous silicon buffer layer on TiO2 nanorods growth
Giant size effect on compressive plasticity of (Zr bulk metallic glass 55 Cu 30 Al 10 Ni 5 ) 99 Nb 1, Materials Science & Engineering A 651 (2016) 968–975
Correlation study of structural, optical and electrical properties of amorphous carbon thin films prepared by ion beam sputtering deposition technique
Preparation of nanostructure silica antireflective coatings by using sol-gel method
Effect of Different TiO2-SiO2 Multilayer Coatings Applied by Sol-Gel Method on Antireflective Property
14- M. Bayegan, R. Gholamipour, F. Shahri, "Gas induced semi-solid process effects on microstructure and mechanical properties of 319 Al alloy", International Journal of Materials Research, 106 (2015) 9; page 1005 – 1009.
13- S. Dodangeh, F. Shahri, S.M.Abbasi, "The Effects of Carbon Content on the Microstructure and 650°C Tensile Properties of Incoloy 901 Superalloy", High Temperature Materials and Process,2015.
Enhancement in glass transition and tensile properties of PMMA nanofibres by incorporation of MgCl2 in the electrospun polymer solution
بررسي تاثير مورفولوژي پودر برخواص حرارتی و استحكام پوششهاي متخلخل شاربالاي حرارتی سنتز شده بروش متالورژی پودر
سنتز ترکیب بین فلزی نانوساختار Zr3Co با خاصیت جذب بالا به روش آلیاژ سازی مکانیکی
Effect of rare earth elements on sorption characteristics of nanostructured Zr–Co sintered porous getters
Ammonia borane confined by poly (methyl methacrylate)/multiwall carbon nanotube nanofiber composite, as a polymeric hydrogen storage material
Development of a nanostructured Zr 3 Co intermetallic getter powder with enhanced pumping characteristics
Effect of melt infiltration parameters on microstructure and mechanical properties of tungsten wire reinforced (Cu 50 Zr 43 Al 7 ) 99.5 Si 0.5 metallic glass matrix composite , Trans. Nonferrous Met. Soc. China 25(2015) 2624−2629
Gas induced semi-solid process effects on microstructure and mechanical properties of 319 aluminum alloy, Int. J. Mater. Res.(formerly Z. Metallkd.) 106 (2015) 9
Defect study of TiO2 nanorods grown by hydrothermal method through photoluminescence spectroscopy
مطالعه پوشش هاي ضدبازتاب تك لايه، چندلايه و كامپوزيتي سيليكا- تيتانيا تهيه شده به روش سل-ژل
Mechanical behavior of TiC coating by PACVD
Mechanical behavior of TiN/TiC multilayer coatings fabricated by plasma assisted chemical vapor deposition on AISI H13 hot work tool steel
Mechanical behavior and properties of TiN/TiC coating using PACVD
Fracture toughness of TiN coating as a function of interlayer thickness
Effect of catalyst type on structural, morphological, and optical properties of SiO2 thin film applied by sol- gel method
Deposition of Titanium Layer on Steel Substrate Using PECVD Method: A Parametric Study
Effect of Temperature and Gas Flux on the Mechanical Behavior of TiC Coating by Pulsed DC Plasma Enhanced Chemical Vapor Deposition
V. Javaheri, F.Shahri, M.Mohammadnezhad, M.Tamizifar, The effect of Nb and Ti on structure and Mechanical prosperties of 12Ni-25Cr-0.4C austenitic heat-resistant steel after aging at 900 °C for 1000 h, Journal of Materials Engineering & Performance, 2014.
Electrospun PMMA/AB nanofiber composites for hydrogen storage applications
EFFECTS OF Co ADDITIONS ON NANOSTRUCTURE AND MAGNETIC PROPERTIES OF MELT-SPUN (Nd,Pr)(2)(Fe,Ti,C)(14)B/Fe3B ALLOYS
بررسی رفتار نوری پوشش های چندلایه-کامپوزیت تیتانیا-سیلیکا اعمال شده با روش سل- ژل
The effect of chlorine content on properties of TiN deposited with PECVD method
11- N. Khademian, R.Gholamipour, F.Shahri, M. Tamizifar, "Effect of vanadium substitution for zirconium on the glass forming ability and mechanical properties of a Zr65Cu17.5Ni10Al7.5 bulk metallic glass", Journal of Alloys and Compounds 546 (2013) 41–47.
10- M. Abbasi, R. Gholamipour, F. Shahri, "Glass forming ability and mechanical properties of Nb-containing Cu-Zr-Al based balk metallic glasses", Trans. Nonferrous Met. Soc. China 23(2013) 2037−2041.
9- M. Mahmodan, H.Akbarzadeh, F. Shahri, "Effect of Cr3C2 and VC on the mechanical and structural properties of sintered Wc-%10wt Co nanopowder", World Journal of Nanoscience and Engineering, 2013, 3, 35-39.
A Novel Study of Electrospun Nanofibers Morphology as a Function of Polymer Solution Properties
Relationship between Single Walled Carbon Nanotubes Individual Dispersion Behavior Properties of Electrospun Nanofibers
Reversible Hydrogen Storage in Electrospun Composite Nanofibers
PHASE TRANSFORMATION, STRUCTURE AND MAGNETIC PROPERTIES OF Nd9.4Pr0.6FebalTixCxCo6Ga0.5B6 RIBBONS PREPARED BY MELT-SPINNING METHOD
Planar Flow Casting of Fe71Si13.5B9Nb3Cu1Al1.5Ge1 Ribbons, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE Volume: 22 Issue: 8 Pages: 2185-2190 Published: AUG 2013
Glass forming ability and mechanical properties of Nb-containing Cu-Zr-Al based bulk metallic glasses
Effects of infiltration parameters on mechanical and microstructural properties of tungsten wire reinforced Cu47Ti33Zr11Ni6Sn2Si1 metallic glass matrix composites
Tailoring hardness and toughness in WC-13%Co-x TiC-y TiN (x=5, 7.5-y=5, 7.5) functional gradient hardmetals (FGHMs)
Study on microstructure and fracture behavior of tungsten wire reinforced Cu-based and Zr-based bulk metallic glass matrix composites
Effect of vanadium substitution for zirconium on the glass forming ability and mechanical properties of a Zr65Cu17.5Ni10Al7.5 bulk metallic glass
Influence of Annealing Temperature on the Magnetic Properties of Rapidly Quenched (Nd,Pr)(2)-(Fe,Co,Ga,Ti,C)(14)B/alpha-Fe Nanocomposite Ribbons
Glass forming ability and mechanical properties of Nb-containing Cu−Zr−Al based bulk metallic glasses, Trans. Nonferrous Met. Soc. China 23(2013) 2037−2041
Studying the effect of growth conditions on ZnO nanowire array synthesized on Si (100) without catalyst
Optoelectronic properties of cauliflower ZnO-ZnO nanorod/p-Si heterostructure
Effects of duty cycle on microstructure and corrosion behavior of TiC coatings prepared by DC pulsed plasma CVD
Effect of duty cycle on residual stress and tribology behaviour of TiC x nanostructure coating deposited by PACVD method
The influence of plasma nitriding pre-treatment on tribological properties of TiN coatings deposited by PACVD
Effect of active screen plasma nitriding pretreatment on wear behavior of TiN coating deposited by PACVD technique
Effect of plasma CVD operating temperature on nanomechanical properties of TiC nanostructured coating investigated by atomic force microscopy
Size-dependency of corrosion behavior for TiN nanostructure coatings deposited by the PACVD method
2- بررسی نحوه تولید و ساختار آلیاژهای سنگین تنگستن چگال از نوع W-Ni-Mn
7- Ballistic performance of hybrid armor with ceramic inserts and polymeric matrix for different threat levels.
5- Development of tungsten heavy alloy “W-Ni-Mn” used as kinetic energy penetrators.
4- Effect of Mn/Ni ratio variation on micro structure of W-Ni-Mn alloy,
1- A. Keyvanara, R. Gholamipour, S. Mirdamadi, F. Shahri, H.S. Amin, "Effect of nanocrystallization annealing on magnetic properties and magnetoimpedance of Co- based ribbons", International Journal of Modern Physics, Vol.5, 2012, 841-846.
Single‐wall carbon nanotubes dispersion behavior and its effects on the morphological and mechanical properties of the electrospun nanofibers
Investigation of polyacrylonitrile electrospun nanofibres morphology as a function of polymer concentration, viscosity and Berry number
Modeling and optimization of electrospun PAN nanofiber diameter using response surface methodology and artificial neural networks
Effect of V substitution on mechanical properties and fracture behavior of ZrCuNiAl bulk metallic glass, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING Volume: 547 Pages: 80-85 Published: JUN 15 20
Formation of bulk metallic glass in situ nanocomposite in (Cu50Zr43Al7)(99)Si-1 alloy
Optimization of Pre-Rolling Homogenizing Heat Treatment for Cast Silicon Steel Ingots
UV photodetection of laterally connected ZnO rods grown on porous silicon substrate
Simulating and modeling of three dimensional columnar growth nanoscale structure
The effect of powder metallurgy process parameters on mechanical properties of micro and nano-iron powder
، اعمال پوشش نانوساختار کاربيد تيتانيوم TiC به روش پلاسما CVD پالسي و مطالعه رفتار خوردگي آن در محيط 5/3 درصد NaCl
Correlation between the surface characteristics and the duty cycle for the PACVD derived TiN nanostructured films
Synthesis and properties of ceramic-based nanocomposite layer of aluminum carbide embedded with oriented carbon nanotubes
The influence of plasma nitriding pre-treatment on the tribological properties of TiN coatings deposited by PACVD
Tribological study of TiN nano structured films deposited on plasma nitrided H11 steel by pulsed DC PACVD
Ali Reza Sabour Rouhaghdam, Paul K. Chu, Improved tribological properties of TiC with porous nanostructured TiO2 intermediate layer
Effect of duty cycle on microstructural, mechanical and tribological properties of TiN layer deposited by PACVD
2- M. Rahimnezhad-Soltani, K. Saberyan, F. Shahri, A. Simchi, "Formation mechanism of TiO2 nanoparticles in H2O-assisted atmospheric pressure CVS process", powder metallurgy, 2011.
Structural characteristics and desorption properties of nanostructured MgH2 synthesised by high energy mechanical milling
Synthesis of a nanostructured MgH2–Ti alloy composite for hydrogen storage via combined vacuum arc remelting and mechanical alloying
Hydrogen desorptionpropertiesofMgH2–TiCr1.2Fe0.6 nanocomposite prepared by high-energymechanicalalloying
Properties of Nd-Fe-B powder explosively compacted, Materials Science Forum,673
Sintering of WC-10%Co nano powders containing TaC and VC grain growth inhibitors
Comparative study of ZnO nanostructures grown on silicon (100) and oxidized porous silicon substrates with and without Au catalyst by chemical vapor transport and condensation
Effect of surface nanocrystallization and PPEC time on complex nanocrystalline hard layer fabricated by plasma electrolysis
Effect of the duty cycle of pulsed current on nanocomposite layers formed by pulsed electrodeposition
A.Kevanara, R.Gholamipour, Sh.Mirdamadi, F.Shahri, A.Abdolhoseini,Effect of quenching wheel speed on the structure, magnetic properties and magnetoimpedance effect in CoFeNiBSiCrAl melt spun ribbons,Journal of Magnetism & Magnetic Materials,2010,2680-2683
Effect of Si addition on glass-forming ability and mechanical properties of Cu-Zr-Al bulk metallic glass
Effects of Ti and C additions on the nanostructure and magnetic properties of (Nd, Pr)- (Fe, Co, Ga)-B melt-spun nanocomposite ribbons
Effect of quenching wheel speed on the structure, magnetic properties and magnetoimpedance effect in Co64Fe4Ni2B19-xSi8Cr3Alx (x=0, 1 and 2) melt-spun ribbons
Fabrication and mechanical properties of a tungsten wire reinforced Cu-Zr-Al bulk metallic glass composite
بررسي تاثير متغيرهاي فرايند نيتروژن دهي پلاسمايي پالسي بر مورفولوژي و سختي لايه هاي نيتريدي تشکيل شده بر روي فولاد گرم کار H11
The influence of active screen plasma nitriding parameters on corrosion behavior of a low-alloy steel
Metal hydrides show potential under stress
Synergetic effect of Ni and Nb2O5 on dehydrogenation properties of nanostructured MgH2 synthesized by high-energy mechanical alloying
Corrosion behavior of Nd9.4Pr0.6Febal.Co6B6Ga0.5TixCx (x=0, 1.5, 3, 6) nanocomposites annealed melt-spun ribbons
Effect of Ge addition on mechanical properties and fracture behavior of Cu-Zr-Al bulk metallic glass
Current improvement of porous silicon photovoltaic devices by using double layer porous silicon structure: applicable in porous silicon solar cells
Microstructural and mechanical characterization of high energy ball milled and sintered WC-10wt%Co-xTaC nano powders, International Journal of Refractory Metals and Hard Materials. Jul. 2009
Study of Pulse on Pulsed Nanocrystalline Plasma Electrolytic Carbonitriding on Nanostructure of Compound Layer
H. Sepehri Amin, R. Gholamipour, F. Shahri, A. Abdolhoseini, "Effect of Al substitution for B on magnetic and structural properties of Co-based melt spun ribbons" Journal of Magnetism and Magnetic Materials, 320, 2008, 2259-2261.
Approach the Interfacial Behaviour in Mini Composite SiCf/Sic By the Push-Out and Push-Back Tests
Effect of Al substitution for B on magnetic and structural properties of Co-base melt spun ribbons, Journal of Magnetism and Magnetic Material. Sep., 2008
تاثير پارامترهاي مختلف نيتروژن دهي پلاسمايي به روش متداول و روش توري فعال بر روي رفتار فولاد کم آلياژ 30CrNiMo8
Influence of the active screen setup and process parameters on the behavior of plasma nitrided 30CrNiMo8 steel
F. Shahri, A. Beitollahi, S.G. Shabestari, N. Wanderka, F. Fiorillo, “Structural characterization and magnetoimpedance effect in amorphous and nanocrystalline AlGe-substituted FeSiBNbCu ribbon, Journal of Magnetism and Magnetic Materials, 312,2007, 35-42.
F. Shahri, A. Beitollahi, S.G. Shabestari, S. Kamali, “Effects of Heat-treatment on the Structure and Magnetic Properties of Al-Ge added FINEMET Alloys”, Physical Review B, 76, 024434, 2007.
F. Shahri, A. Beitollahi, S.G. Shabestari, “Effect of Super-Heat Treatment and Quenching Wheel Speed on the Structure and Magnetic Properties of Fe-Si-B-Nb-Cu-Al-Ge Melt-Spun Ribbons”, Journal of Non-Crystalline Solids, 2007.
Cu effects on coercivity and microstructural features in nanocrystalline Nd-Fe-Co-B annealed melt-spun ribbons
Effects of various nitriding parameters on active screen plasma nitriding behavior of a low-alloy steel
Layered interphases in ceramic matrix composites and relation with interfacial behaviour, Advances in Science and Technology
Magnetic and structural properties of rapidly quenched Nd-Fe-Co-Ge-B alloys
Microstructural studies and micromagnetic analysis of nanocrystalline NdFeCoMB (M = Ga, Ge) melt-spun ribbon
Microstructure-magnetic properties relationships in nanocrystalline Nd-Fe-Co-Ge-B annealed ribbons
A new role of M1 type dopant for Nd-rich Nd-Fe-Co-B nanocrystalline ribbons
Influence of modification, solidification condition and heat treatment on the microstructure and mechanical properties of A356 aluminum alloy
ضرورت ایجاد و حمایت از تشکلهای صادراتی
کتمان علم ، امنیت ملی و کنترل ارتباطات علمی
اقتصاد جهانی مواد مخدر و جایگاه ایران